Thank you for considering our line of trash hauling devices

Hooks are specially designed and act as a retaining device that holds the handle in place during transportation. The hook and swiveling top rail are key in making a smooth trouble-free way to get trash down a winding driveway. The design is patented and comes in four different mounting methods; receiver mounted, ball mounted, bolt mounted and bumper mounted.

Ideal operating height is 14"-21" 

​

RECEIVER MOUNTED - Attach the Garbage Hook to any 2" or 1-1/4" receiver hitch, then simply tilt trash bins over our specially designed retainer hooks and drive the trash to the road.  The cans remain on the hooks and work over gravel, grass, or hard surfaces. Garbage Hook's will make getting your trash in bad weather safer and easier.  Our swiveling bracket allows cans to trail evenly and smoothly down your driveway like a trailer.  The upright has a 6" adjustable riser to set the operating level to the ideal working height. Leave your Garbage Hook on, so it is ready to haul the cans back to your storage spot after your trash is empty.  To make attaching the receiver models even easier, add the quick pivot locking hitch pin.      

​

BALL MOUNTED - Garbage Hooks allow you to keep your existing  1-7/8" or 2" trailer hitch in place, then simply pin it to the underside of the ball, and tilt the garbage cans over the specially designed retainer hooks. Ball mounted Garbage Hooks are available in either a double can or single can model. Operating height will be determined by your trailer hitch distance off the ground. 

Pay for Product, NOT Packaging! - We don't spend thousands on fancy packaging that just ends up in the landfill. All our packaging and products are 99% recyclable! We do this for two reasons; environmental responsibility and to keep cost as low as we can.

WARNING: DO NOT BACKUP WITH CANS ATTACHED, DAMAGE CAN OCCUR TO DEVICE OR TOW VEHICLE

Click to watch short video

 

<script>
  (function(i,s,o,g,r,a,m){i['GoogleAnalyticsObject']=r;i[r]=i[r]||function(){
  (i[r].q=i[r].q||[]).push(arguments)},i[r].l=1*new Date();a=s.createElement(o),
  m=s.getElementsByTagName(o)[0];a.async=1;a.src=g;m.parentNode.insertBefore(a,m)
  })(window,document,'script','//www.google-analytics.com/analytics.js','ga');

  ga('create', 'UA-58344753-2', 'auto');
  ga('send', 'pageview');

</script>

SPECIFICATIONS:

Specifications for our hooks are on the right, you can click on the below picture to stop the slideshow and view a larger picture for the different hook placements.

Hooks are 1-1/8" inch wide.  Our double can carrier arms adjust to either 36" or 40" wide. You have the ability to set the spacing for either. Note the 40" setting can have our hooks at two different mountings 11", 14" and 11" - or - 13", 10" 13" spacing.

Additional installation pictures

Additional installation videos

Weight Capacity

We have determined that by “handle weight” 

That is the total amount of weight resting on the hook itself. 

We loaded a trash can with 150 lbs and tested it at 3 different points. 

14”, 18” and 21” which is the recommended height range for all our products. 

• For our UBL units the handle weight would be 40 lbs

• For our Receiver Mounted the handle weight would be 50 lbs

• For our Ball Mounted the handle weight would be 75 lbs. 

If you have any other questions regarding handle weight please reach out to us. We are here to help.